Why won't my Samsung DMT400 Dishwasher start?
Your Samsung Dishwasher might not start due to several reasons: the door may not be completely closed and latched; no cycle might be selected; the power cable might not be properly connected; the water supply valve might not be open; the control panel might be locked (try to unlock the Child lock); or a circuit breaker might be open (try resetting it).
Why is my Samsung Dishwasher too noisy?
A Samsung Dishwasher can be noisy for several reasons: the sound may be normal operation from the dispenser cover opening or the drain pump operating early in the cycle. Ensure the dishwasher is level. If there's a foreign material in the pump chamber, contact a qualified service technician. Also, rearrange dishes if a nozzle is bumping against them, causing a 'chopping' sound.
How to fix a Samsung Dishwasher that does not dry dishes well?
If your Samsung Dishwasher isn't drying dishes effectively: * Ensure the rinse aid dispenser is full, using a liquid type rinse aid. * Connect the water supply line to a hot water supply and use rinse aid with the Sanitize option. * Avoid overloading the dishwasher and load dishes as recommended. * Empty the lower rack before the upper rack after the cycle to prevent water from dripping onto the lower dishes from concave bottoms of glasses and cups.
What to do if Samsung DMT400 leaves glasses with a dim polish?
If your Samsung Dishwasher leaves glasses with a dim polish, it could be due to soft water and excessive detergent use; try underloading the dishwasher and using a rinse aid. If aluminum dishes were included, remove marks with a low sensitivity cleaner.
What to do if my Samsung Dishwasher leaves a yellow or brown film inside?
If a yellow or brown film appears inside your Samsung Dishwasher, it's likely from coffee and tea stains. Remove the stains using a spot cleaner.
Why is my Samsung Dishwasher taking so long to wash?
If your Samsung Dishwasher is taking too long, it might be due to cold water being supplied. Ensure the water supply line is connected to a hot water supply, as heating cold water adds time to the cycle.
How to get rid of bad odor in Samsung DMT400?
To eliminate a bad odor from your Samsung Dishwasher: If water remains after an incomplete cycle, add detergent without loading dishes and run a Normal cycle. If the drain hose is obstructed, contact a qualified service technician. If the dishwasher isn't used daily, or soiled dishes are left too long, place a glass with 8 ounces of vinegar upright in the lower rack without detergent and run a Normal cycle.
What to do if my Samsung DMT400 nozzle does not rotate smoothly?
If the nozzle on your Samsung Dishwasher isn't rotating smoothly, it might be clogged with food particles; clean the nozzle hole. Alternatively, a dish or pot might be blocking the nozzle; rearrange the dishes and manually rotate the nozzles to ensure they aren't obstructed.
What to do if my Samsung Dishwasher upper rack is bent after loading dishes?
If the upper rack of your Samsung Dishwasher is bent after loading dishes, it's likely due to improper loading. Load your dishes as recommended.
What to do if my Samsung DMT400 is not cleaning properly?
If your Samsung Dishwasher isn't cleaning dishes well, consider these possibilities: * Ensure you've selected the appropriate cycle for the load size and soil level. * Verify that the water supply line is connected to a hot water supply, ideally at 120 °F (49 °C). * Check that the water pressure is between 20 and 120 psi (140 ~ 830 kPa). * Use a commercial dishwasher cleaner if the water is too hard, and use high-quality detergent with rinse aid. * Make sure you're using automatic dishwasher detergent, preferably powder or gel. * Confirm that the detergent dispenser isn't blocked by large items. * Check and add rinse aid to the dispenser, using a liquid type. * Clean any clogged nozzles. * Rearrange dishes to avoid blocking nozzle rotation or the detergent dispenser, and...
Basic safety precautions to reduce the risk of fire, explosion, electric shock, or personal injury.
Details on Tip-Over, Electric Shock, and California Proposition 65 warnings.
Details the buttons and indicators on the dishwasher's control panel.
Ensures safe operation by covering wiring, grounding, and circuit breaker requirements.
Specifies requirements for water pressure, temperature, and leak prevention.
Guidance on diagnosing and solving common problems like 'Will not start' or 'Food particles remaining'.
Explanation of control panel codes and their corresponding solutions.
General| Brand | Samsung |
|---|---|
| Model | DMT400 series |
| Category | Dishwasher |
| Language | English |
To Next Page
