You can use the TV functions with the remote control.
Check the functions of each button.
The appearance of the remote control may dier from •
the actual one. Some functions may not be provided
depending on the system.
You can turn this product on by pressing the Power button •
on the remote control. However, you cannot turn this
product o with the Power button.
Use your remote control by pointing it toward the remote •
control receiver.
Installing the batteries
Open the cover at the bottom of the remote control and insert the
batteries according to the correct polarities (+,-).
To turn the product on by pressing the Power button
on the remote control, press the F2 key when the booting
logo appears to enter the BIOS Setup and set the Advanced
> Advanced Environment Control > Remote Controller
Boot item to Enabled.
Using the Remote Control
(Optional)
To Next Page
Loading...
