Samsung DP700A3D-A01US - Using the Remote Control (Optional); Installing the Batteries

74
75
Chapter 3.
Using the computer
You can use the TV functions with the remote control.
You can run the Live TV program from the desktop.
Check the functions of each button.
The appearance of the remote control may dier from •
the actual one. Some functions may not be provided
depending on the system.
You can turn this product on by pressing the Power button •
on the remote control. However, you cannot turn this
product o with the Power button.
Use your remote control by pointing it toward the remote •
control receiver.
Installing the batteries
Open the cover at the bottom of the remote control and insert the
batteries according to the correct polarities (+,-).
To turn the power on or wake the computer up by pressing
the Power button , you have to change the settings in
the BIOS Setup screen.
However, this feature can only be congured through the
BIOS Setup menu for models equipped with a TV tuner card.
1. After booting up the computer, press the F2 key to enter
the BIOS Setup.
2. Select Advanced > Advanced Environment Control >
Remote Controller Boot from the BIOS Setup menu and
set it to Enabled.
Using the Remote Control
(Optional)