To Next PageTo Next PageWhy are my garments still wrinkled after using the Wrinkle-Care setting on my Samsung Dryer?
For best results with the Wrinkle-Care setting on your Samsung Dryer, use small loads of 1 to 4 items. Load fewer garments, and load similar-type garments together.
Why is my Samsung DV395 Dryer so noisy?
If your Samsung Dryer is noisy, check the load for objects such as coins, loose buttons, or nails, and remove them. It is normal to hear the dryer gas valve or heating element cycle on and off. Ensure the dryer is leveled properly according to the installation instructions. It's also normal for the dryer to hum due to air moving through the drum and exhaust system.
What to do if my Samsung DV395 doesn’t run?
If your Samsung Dryer doesn't run, ensure the door is fully latched. Also, check that the power cord is properly plugged into a working electrical outlet and verify the home's circuit breaker and fuses. If the door was opened during the cycle, press the Start/Pause button again.
Why is my Samsung Dryer not drying clothes?
If your Samsung Dryer isn't drying clothes properly, ensure the exhaust hood outside your home can open and close without obstruction. Check the exhaust system for any lint buildup and consider having the ducting inspected and cleaned annually. Use a 4” rigid metal exhaust duct. Avoid overloading the dryer; one wash load should equal one dryer load. Sort heavy items from lighter ones, and reposition large, bulky items to ensure even drying. Confirm that your washer is draining correctly, and if the load is too small, add a few towels.
Why does water drip from the nozzle when Steam-Care starts on my Samsung Dryer?
If water drips from the nozzle when the Steam-Care cycle starts on your Samsung Dryer, this is steam condensation and will stop after a short time.
What does FE error mean on Samsung Dryer?
Try restarting the cycle. If the problem continues, call for service.
What to do if Samsung Dryer dries unevenly?
If your Samsung dryer dries unevenly, it's normal for seams, pockets, and other heavy areas to remain slightly damp. If desired, select the More Dry setting. If drying a single heavy item with lightweight items, the heavy item may not dry completely. For best results, sort heavy items from lightweight items.
What does tE error mean on Samsung Dryer?
Clean the screen or vent. If the problem continues, call for service.
How to prevent lint on clothes in my Samsung Dryer?
To prevent lint on clothes when using your Samsung Dryer, clean the lint filter before every load. For loads that produce a lot of lint, clean the filter during the cycle. Separate lint producers (like fuzzy white cotton towels) from lint trappers (like black linen pants). Divide larger loads into smaller ones, and check pockets thoroughly before washing and drying.
Why does my Samsung DV395 Dryer shut off before load is dry?
If your Samsung Dryer shuts off before the load is dry, the load might be too small or too large. Try adding more items or a few towels if the load is too small, or remove some items if the load is too large, then restart the cycle.
General| Dryer Type | Electric |
|---|---|
| Ventless | No |
| Brand | Samsung |
| Drying Technology | Sensor Dry |
| Energy Star Certified | Yes |
| Color | White |
| Voltage | 240V |
| Amperage | 30A |
Provides ample space for drying large loads, improving efficiency and reducing wrinkles.
Automatic error-monitoring system that diagnoses and provides solutions for dryer issues.
Reduces odors and wrinkles by spraying steam into the drum after tumbling with heat.
Eliminates 99.9% of bacteria using high-temperature heat for sanitizing garments.
Offers 13 automatic cycles and Fuzzy Logic for precise, automatic drying time adjustments.
Designed to dry clothes quickly in as little as 42 minutes, saving user time.
Efficient drying up to 3.01 lbs per kWh, saving energy through large capacity and Fuzzy Logic.
Allows the dryer door to be easily and quickly changed to open from either side.
Optional pedestal raises dryer for easier loading and includes a storage drawer.
Allows stacking of washer and dryer to maximize usable space, requires optional kit.
Provides flexibility to install exhaust vent in back, side, or bottom positions.
Critical safety warning regarding proper installation and venting to prevent fire hazards.
Explains safety symbols and essential precautions for safe dryer operation and maintenance.
Informs about potential exposure to chemicals known to cause cancer or reproductive harm.
Provides immediate safety steps to take in case of a gas leak detection.
Lists essential requirements for proper dryer installation, including electrical and gas hookups.
Specifies correct ducting materials, lengths, and installation rules for safe exhaust.
Guidance on selecting a safe and appropriate location for dryer installation.
Details minimum clearances required for installing the dryer in an alcove or closet.
Addresses specific installation requirements for dryers in mobile homes.
Provides instructions on proper dryer exhaust ventilation to the outside.
Details requirements for natural or LP gas supply, conversion, and safety.
Outlines necessary electrical service, wiring, and grounding standards.
Explains the importance and methods for properly grounding the dryer.
Provides detailed instructions for connecting the dryer's electrical power.
Lists the tools required to properly install the dryer.
Step-by-step guide for the overall dryer installation process.
A checklist to ensure all installation steps and connections are completed correctly.
Practical advice and warnings for efficient and safe dryer exhaust system setup.
Instructions for changing the direction of the dryer door swing.
Guides on how to connect the water inlet hoses for the dryer.
Explains the dryer's control panel layout and identifies key buttons and indicators.
Guides on selecting drying cycles and understanding sensor dry functions.
Explains the meaning of the display window and indicator lights during operation.
Details options like Wrinkle Prevent, Mixed Load Bell, Delay Start, and My Cycle.
How to choose the desired dryness level for different fabric types.
How to select the appropriate temperature setting for various fabrics.
How to start, pause, and restart drying cycles.
How to enable/disable the child lock feature to prevent accidental operation.
Instructions on how to turn the interior drum light on and off.
Guides on setting a delayed start time for drying cycles.
How to select, save, and run custom dryer cycles.
Explains the Vent Sensor's function in detecting duct blockages and indicating cleaning needs.
Details how to use a smartphone app to diagnose dryer errors and issues.
Instructions for using the drying rack accessory for specific items.
Importance and procedure for cleaning the lint filter for efficiency and safety.
Guidance on how to load the dryer for optimal tumbling and drying efficiency.
Basic steps to begin operating the dryer after loading and selecting a cycle.
Instructions for safely cleaning the dryer's control panel without damage.
Methods for removing stains from the dryer's internal tumbler.
Proper cleaning techniques for the stainless steel dryer drum.
Guidelines for cleaning the external finish of the dryer.
Recommendations for inspecting and cleaning the dryer's exhaust system.
Guidance on drying specific garments and fabrics based on care labels.
Lists materials and items that should not be placed in the dryer to prevent damage or fire.
Explains error codes displayed by the dryer and their corresponding solutions.
Provides a chart of garment care symbols for washing, drying, and ironing.
Technical details including dryer dimensions, weight, and ratings.
Details recommended items, load sizes, and functions for each dryer cycle.
Outlines the terms, conditions, and duration of the limited warranty for US customers.
Outlines the terms, conditions, and duration of the limited warranty for Canadian customers.
