Troubleshooting
English 47
Problem Action
Water drips from the
nozzle when STEAM
CARE starts.
• This is steam condensation. The dripping water will stop after
a short time.
Sprayed water is not
visible during STEAM
CARE.
• Sprayed water is difcult to see when the door is closed.
Drying takes too long.
• Sensor Dry automatically senses the moisture in the load
and shuts the dryer off when the selected dryness level is
reached.
The drying time can change according to the type and
amount of laundry. See the cycle chart for reference.
If a problem persists, contact a local Samsung service center.
DV3000A(SEM)_DC68-03784P-00_EN.indd 47 2020-12-07 4:51:01
To Next Page