What to do if nozzles don't rotate smoothly in Samsung DW60A608?
If the nozzles in your Samsung Dishwasher do not rotate smoothly, they are likely clogged with food particles. Clean the nozzles to resolve this issue.
Why does food remain on dishes in my Samsung DW60A608?
If food remains on dishes after a cycle in your Samsung Dishwasher, ensure you're selecting the appropriate cycle for the soil level. Clean and correctly fasten the filters. Use the correct amount of detergent, and verify that your water pressure is between 0.04-1.0 Mpa. Also, clean any clogged nozzles and arrange dishes so they don't block the nozzles or detergent dispenser. Finally, if your water is hard, check and refill the dishwasher salt.
How to improve drying in my Samsung DW60A608 Dishwasher?
If your dishes aren't drying well in your Samsung Dishwasher, ensure the rinse aid dispenser is full and the settings are correct. Avoid overloading the dishwasher. Empty the lower rack first, then the upper rack to prevent water from dripping. If using multiple detergent tablets, select the Sanitize option or use rinse aid.
What to do if water remains in my Samsung Dishwasher after cycle?
If water remains in your Samsung Dishwasher after a cycle, the drain hose might be folded or clogged. Straighten and unclog the hose to resolve this issue.
Why is my Samsung DW60A608 Dishwasher so noisy?
Your Samsung Dishwasher may be noisy for several reasons. A sound occurs when the dispenser cover opens and the drain pump operates, which is normal. Ensure the dishwasher is level. If you hear a chopping sound, rearrange the dishes to prevent the nozzle from bumping against them.
Why won't my Samsung DW60A608 start?
Your Samsung Dishwasher might not start because the door isn't completely closed and latched, the upper rack isn't properly joined with the nozzle or assembled, the power cord isn't connected to a power supply, the water supply valve is closed, or the control panel is locked. Make sure the door is latched and completely closed, the upper rack is properly joined with the nozzle and assembled, check the power supply, make sure the water supply valve is open, and deactivate the Control Lock.
What are the air bubbles and scratch marks on the control panel of my Samsung DW60A608?
If there are air bubbles and scratch marks on the control panel of your Samsung Dishwasher, it may be due to air getting into the protective film. Remove the protective film from the control panel.
Why don't the indicators light up on my Samsung DW60A608 Dishwasher?
If the indicators on your Samsung Dishwasher do not light up, check that the power cord is properly connected to a power supply.
How to prevent food from remaining on dishes in my Samsung Dishwasher?
If food remains on dishes after a cycle in your Samsung Dishwasher, consider the following: * Ensure you've selected the appropriate cycle for the soil level of your dishes. * Check and clean the filters, making sure they are correctly fastened. * Use the correct amount of detergent for each load. * Verify that the water pressure is between 0.04-1.0 Mpa. * Inspect and clean any clogged nozzles. * Properly load dishes to avoid blocking nozzles or the detergent dispenser. * If the water is too hard, check and refill the salt refill indicator with dishwasher salt.
Why is there a white coating on dishes from my Samsung DW60A608?
If a white coating remains on dishes in your Samsung Dishwasher, the water might be too hard. Ensure the salt refill indicator and softener settings are correct for your area's water hardness. Also, make sure the salt storage cap is correctly fastened.
General| Brand | Samsung |
|---|---|
| Model | DW60A608 Series |
| Category | Dishwasher |
| Language | English |
To Next Page
