English26
Installation
Installation
A
A
A
A
C
C
B
B
3. Remove the installation template, and
then tighten the Custom panel xers (B),
(C) with 12 screws (A) as shown in the
gure.
4. While holding the custom panel, attach
it to the door and insert the Custom
panel xers into the corresponding
holes at the door.
CAUTION
Use a custom panel between 4-10kg. Make
sure the skirting board does not interfere
with the dishwasher’s door fully opening
and closing.
DW6500AM_DW60A6092FW_EU_DD81-04050B-01_EN.indd 26 2021-09-30 12:36:18
To Next Page
Loading...
