English 31
Installation
To the sides
CAUTION
If the plastic caps are not assembled, water
may leak and cause a re or electric shock.
1. Remove the plastic caps.
2. Tighten the 2 screws (Ø3.5 X 16) to the
2 places (marked on the illustration).
3. Insert the provided plastic caps to the
2 places where screws are fastened.
4. Connect the water hose, but do not
open the water tap until installation is
complete.
DW8500AM_DW60A8070BB_EU_DD81-03206B-01_EN.indd 31DW8500AM_DW60A8070BB_EU_DD81-03206B-01_EN.indd 31 2021-03-24 �� 1:25:272021-03-24 �� 1:25:27
To Next Page
Loading...
