English28
Installation
Installation
STEP 7 Secure the dishwasher
You can drill the side holes to secure the dishwasher to the cabinet sides.
To the sides
CAUTION
If the plastic cap is not assembled, water
may leak and cause a re or electric shock.
1. Tighten the 4 screws (Ø4 X 12) to the
4 places (marked on the illustration).
2. Insert the provided plastic caps to the
4 places where screws are fastened.
3. Connect the water hose, but do not
open the water tap until installation is
complete.
STEP 8 Connect the drain hose
1. Detach the hose holder from the
dishwasher, and then cut off the
protruding part from the holder as
shown.
2. Fix the holder to a wall by tightening
the 2 screws (Ø4 X 12).
FULL_DW60BB890UAPET_DD68-00254C-00_EN.indd 28 2023-03-09 6:27:36
To Next Page
Loading...
