English 51
Before you start
Auto Release Dry
To improve drying performance, the door
opens automatically in the drying process.
‘0’ will be displayed when the current cycle
is complete.
Press Hygiene Plus until ‘A1’ or ‘A0’ is
displayed to enter Auto Release Dry mode.
Then, press Delay Start to enable (A1) or
disable (A0) the Auto Release Dry function.
NOTE
• Once the door opens in Auto Release Dry mode, the door cannot be closed manually for
the next 2 minutes.
• Disabling Auto Release Dry mode can affect the drying results. Enable Auto Release Dry
for better results.
To cancel your changes
To cancel any of the settings during the process, press Power to turn the dishwasher off.
Then, try again.
FULL_DW60BB890UAPET_DD68-00254C-00_EN.indd 51 2023-03-09 6:27:45
To Next Page
Loading...
