Samsung DW60H9950 Series - Page 12

12_ Installing your dishwasher
STEP2. CHECKING WATER SUPPLY AND ELECTRICAL
REQUIREMENTS
• The water supply line pressure must be between 0.05-0.8MPa.
• Supply cold water only. Make sure that the water temperature does not exceed 60˚C.
• Do not supply hot water. Otherwise, the product may malfunction.
• Use a rated power of 220-240 V~, 50Hz.
• Install the product while the power cord is unplugged.
• Use a power outlet with a maximum allowable current of 16A. (The maximum current for this dish
washer is 11A.)
• When powering the dishwasher, ensure that your power supply has:
- An 220-240 V~, 50 Hz fuse or circuit breaker.
- An individual branch circuit serving your dishwasher.
• After the installation, check if the power cord is not bent or damaged.
• Ensure that the water supply valve is turned o before connecting the water supply line to the
dishwasher.
• Seal the water supply line connections using tefl on tape or sealing compound to stop any water
leakage.
CAUTION
WARNING
Installing your dishwasher
BU-Install_DD68-00160B-07_EN.indd 12BU-Install_DD68-00160B-07_EN.indd 12 2017-02-08  1:28:472017-02-08  1:28:47