Samsung DW60H9950 Series - Page 15

Installing your dishwasher _15
03 INSTALLING
STEP5. SECURING THE DISHWASHER
1
1. Hook the installation brackets into the holes as shown in the fi gure above.
When you fi x the product at the sides instead of fi xing it at the top, you do not need to use the
installation brackets. In this case, please refer to the “B. To fi x the product at the sides (when the
material of the counter top is not appropriate for drilling)” section on page 17.
2. Insert the product into the place under the counter top completely again.
3. Ensure that the power cord, water supply hose or drain hose are bent or fold.
4. Connect the water supply hose.
Do not open the water tap until the installation of the dishwasher is complete.
CAUTION
BU-Install_DD68-00160B-07_EN.indd 15BU-Install_DD68-00160B-07_EN.indd 15 2017-02-08  1:28:472017-02-08  1:28:47