Installing your dishwasher _17
03 INSTALLING
B. To fi x the product at the sides (when the material of the counter top is not appropriate
for drilling)
2
1. Remove upper and lower caps from both side with a tool such as a fl at-head screwdriver as shown in
fi gure.
Do not remove middle caps from both side.
Do not discard the removed plastic caps.
2. Pre-drill the holes with a 2-pi drill bit to a depth of 10-12mm and fasten the 4 screws
2
.
3. Reinstall the plastic caps to their original position.
Failing to do so may result in fi re or electric shock due to water leakage.
CAUTION
CAUTION
CAUTION
BU-Install_DD68-00160B-07_EN.indd 17BU-Install_DD68-00160B-07_EN.indd 17 2017-02-08 1:28:482017-02-08 1:28:48
To Next Page
Loading...
