44_
Installation Instruction
Built-in dishwasher
WARNING : Electrical Shock Hazard!
Disconnect electrical power before installing dishwasher.
Failure to do so can result in death or electrical shock.
CAUTION: Water pipe and electric device should be installed by professionals
Step 1. Before installation
• Dishwasher place requirement. The back of dishwasher should face to the wall, and the dishwasher has
inlet and outlet pipe, which can be connected on the right or left side conveniently.
• To protect the cabinet from steam, attach the protective film under the cabinet as shown.
• The dimensions of installation Cabinet.
Installation instruction
DW4000KM-00000A-00_EN (Basic)_160323.indd 34
Install the dishwasher into
the cabinet
The connectors
for power cord
and inlet/outlet
hose
580mm(Min.)
600mm(Min.)
810-880mm
To Next Page
Loading...
