Safety instructions
_7
INSTRUCTIONS FOR INSTALLING YOUR DISHWASHER
To prevent a risk of fire, electric shock, or personal injury, all wiring and grounding must be done by a
qualified technician.
Power supply
• An individual 220-240 V~, 50 Hz branch circuit that is dedicated to the dishwasher.
• Power outlet with a maximum allowable current of 16 A (maximum 11 A for the dishwasher)
WARNING
• Do not use an extension cord.
• Use only the power plug that comes with the dishwasher.
• After installation is complete, make sure the power plug is not bent or damaged.
Grounding
For permanent grounding, the dishwasher must be properly grounded to a grounded metal or
permanent wiring system. The grounding conductor must be run with the circuit conductors and
then connected to the grounding terminal or lead on the dishwasher.
WARNING
• Do not connect the ground wire to plastic plumbing, gas lines, or hot water pipes.
Improperly connected grounding conductors may cause electric shock.
• Do not modify the power plug of the dishwasher. If the power plug does not fit the
outlet, have a proper outlet installed by a qualified electrician.
DW5500MM_DD81-02615C-10_EN.indd 7DW5500MM_DD81-02615C-10_EN.indd 7 2022-12-19 오후 1:50:152022-12-19 오후 1:50:15
To Next Page
Loading...
