Samsung DW60M5050 Series - Page 11

Standard Disassembly Drawings _ 11
Part Figure Description
DOOR HINGE
DW60M****F*
DW60M5050BB
5. Connect the wire harness to Sub PBA.
Caution
Make sure the Wire harness are not getting stuck in
other parts.
NOTE :
Incase of DW60M50**** models, place the DOOR
SWITCH assembly on the CONTROL PANEL also.
B
A
6. Fix 8 screws to assemble the ASSY CONTROL
PANEL with Torx® T15 screwdriver.
- Type A: DD81-01371A / 2 pcs
- Type B: DD81-02466A / 6 pcs
1
2
7. Assemble the holes of DOOR OUTER to hooks of
CONTROL PANEL.
Warning
Do not do this work without safety gloves. It may
cause injury from sharp edges.
Holes of DOOR OUTER Hooks of CONTROL PANEL
C
8. Fasten 6 screws to x the DOOR OUTER.
NOTE :
Use the Torx® T15 screw driver.
- Type C: DD81-01370A / 6 pcs