Washing programmes _25
04 WASHING PROGRAMMES
AT THE END OF THE WASH CYCLE
When the working cycle has finished, the dishwasher buzzer will beep shortly, then stop. In the digital
display appears “0”, only in this case the programme has ended.
1. Switch o the dishwasher by pressing the POWER button.
2. Turn o the water tap!
Open the door carefully. Hot steam may escape when the door is opened!
• Hot dishes are sensitive to knocks. The dishes should be allowed to cool down around 15 minutes
before removing from the appliance.
• Open the dishwasher’s door, leave it and wait a few minutes before removing the dishes. In this
way they will be cooler and the drying will be improved.
It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper
basket onto the dishes in the lower one.
DW60M5070IB_ET_DD81-02615K-00_EN.indd 25DW60M5070IB_ET_DD81-02615K-00_EN.indd 25 2019-09-17 2:50:412019-09-17 2:50:41
To Next Page
Loading...
