16 _ Standard Disassembly Drawings
Part Figure Description
DOOR HINGE /
GUIDE HINGE
(DW6*R70**F*/
DW6*R70**U*/
DW6*R70**S*)
Hook
Hook
4. Remove 2 terminals that connected to
DETERGENT DISPENSER, and 1 ground wire that
connected to BRACKET DOOR FRAME.
Warning
Be sure to remove the power plug before
servicing.
Caution
Pay attention to hook of terminals.
5. Remove HOLDER ROPE DOOR from the DOOR
HINGE left & right with the DOOR closed.
Caution
Pay attention to DOOR drop after remove the
rope. It can cause injury.
GUIDE
HINGE
6. Push both ribs of GUIDE HINGE to pull out the
DOOR.
Warning
Do not this work without safety gloves. It can
cause injury from sharp edge of broken parts.
About 15˚
7. Do same work at the opposite side, and pull out the
DOOR INNER assembly to the direction of about
15˚.
Warning
Do not this work without safety gloves. It can
cause injury from sharp edge.
To Next Page
Loading...
