Samsung DW60M6050 Series - Page 17

Standard Disassembly Drawings _ 17
Part Figure Description
DOOR HINGE /
GUIDE HINGE
(DW6*R70**F*/
DW6*R70**U*/
DW6*R70**S*)
8. Remove 2 screws to take off BRACKET DOOR
FRAME from the DOOR INNER.
- Screws: DD81-02728A / 2 pcs
Warning
Do not this work without safety gloves. It can
cause injury from sharp edge.
9. Remove 2 screw at each side to take off DOOR
HINGE from the DOOR INNER.
- Screws: DD81-02764A / 4 pcs
10. Take off the GUIDE HINGE from the DOOR
HINGE.
NOTE :
DOOR HINGE and GUIDE HINGE will serviced to
assembly only.
[ASSEMBLY]
1. Assemble the DOOR HINGE assembly and
BRACKET DOOR FRAME with machine screws.
- Screws for DOOR HINGE assembly :
DD81-02764A / 4 pcs
- Screws for BRACKET DOOR FRAME :
DD81-02728A / 2 pcs
Warning
Do not this work without safety gloves. It can
cause injury from sharp edge.
About 15˚
2. Put the DOOR INNER assembly into the holder of
TUB to lock the hook of DOOR HINGE.
Warning
Do not this work without safety gloves. It can
cause injury from sharp edge.