Samsung DW60M6050 Series - Page 18

18 _ Standard Disassembly Drawings
Part Figure Description
DOOR HINGE /
GUIDE HINGE
(DW6*R70**F*/
DW6*R70**U*/
DW6*R70**S*)
3. Put the HOLDER ROPE DOOR on the both side of
DOOR HINGE with the DOOR closed.
4. Connect 2 terminals of DETERGENT DISPENSER,
and 1 ground wire.
Caution
Make sure the Wire harness are not getting stuck
in other parts.
5. Connect wire terminal to connect MAIN PBA to
TOUCH PBA.
Caution
Make sure the Wire harness are not getting stuck
in other parts.
B
B
A
6. Fix 8 screws to connect the ASSY CONTROL
PANEL to the dishwasher’s DOOR with Torx® T15
screwdriver.
- Type A: DD81-03011A / 6 pcs
- Type B: DD81-02758A / 2 pcs
2
1
7. Assemble the holes of DOOR OUTER to hooks of
CONTROL PANEL.
Warning
Do not this work without safety gloves. It can
cause injury from sharp edge.
Holes of DOOR OUTER Hooks of CONTROL PANEL
C
C
B
B
8. Fasten 8 screws to x the DOOR OUTER.
NOTE :
Screws on DOOR are Torx® T15 type. Use the
Torx® T15 screw driver when release the screws.
- Type B: DD81-02758A 4 pcs
- Type C: DD81-02757A 4 pcs