Samsung DW60M6050 Series - Page 20

20 _ Standard Disassembly Drawings
Part Figure Description
DOOR HINGE /
GUIDE HINGE
(DW6*R70**BB)
5. Remove HOLDER ROPE DOOR from the DOOR
HINGE left & right with the DOOR closed.
Caution
Pay attention to DOOR drop after remove the
rope. It can cause injury.
GUIDE HINGE
6. Push both ribs of GUIDE HINGE to pull out the
DOOR.
Warning
Do not this work without safety gloves. It can
cause injury from sharp edge of broken parts.
About 15˚
7. Do same work at the opposite side, and pull out the
DOOR INNER assembly to the direction of about
15˚.
Warning
Do not this work without safety gloves. It can
cause injury from sharp edge.
8. Remove 2 screws to take off BRACKET DOOR
FRAME from the DOOR INNER.
- Screws: DD81-02728A / 2 pcs
Warning
Do not this work without safety gloves. It can
cause injury from sharp edge.
9. Remove 2 screw at each side to take off DOOR
HINGE from the DOOR INNER.
- Screws: DD81-02764A / 4 pcs
10. Take off the GUIDE HINGE from the DOOR
HINGE.
NOTE :
DOOR HINGE and GUIDE HINGE will serviced to
assembly only.