38_ Installing your dishwasher
STEP 4. DISHWASHER INSTALLATION
1. Install the furniture door to the outer door of the dishwasher using the brackets provided. Refer to the
template for positioning of the brackets.
2. Connect the inlet hose to the cold water supply.
3. Connect the drain hose. Refer to diagram.
4. Connect the power cord.
5. A x the condensation strip under the work surface of cabinet. Please ensure the condensation strip is
fl ush with edge of work surface.
6. Place the dishwasher into position.
7. Level the dishwasher. The rear food can be adjusted from the front of the dishwasher by turning the
Allen screw in the middle of the base of dishwasher use an Allen key. To adjust the front feet, use a fl at
screw driver and turn the front feet until the dishwasher is level.
8. The dishwasher must be secured in place. There are two ways to do this:
A. Normal work surface : Put the installation hook into the slot of the side plane and se cure it to the
work surface with the wood screws.
B. Marble or granite work top : Fix the side with Screw.
Installing your dishwasher
DW5500M_DD81-02437Q-00_EN.indd 38DW5500M_DD81-02437Q-00_EN.indd 38 2019-06-25 11:13:282019-06-25 11:13:28
To Next Page
Loading...
