Samsung DW60R2014 Series - Page 14

Setting up your dishwasher
DW60R2014AP
01 02 03 04 05 06 07 08 09 10
01 POWER
When you press the POWER button, the entire display turns on and
off. When the selected cycle is complete, the dishwasher powers
off automatically.
02 Cycles
Select the appropriate wash cycle depending on the soil level of
your dishes.
03 Half Load
For small loads, use either the upper or lower rack only to save
energy. Press the Half Load button to select the upper or lower
basket.
04 Sanitize
The temperature rises to 158 ˚F (70 ˚C) in the nal rinse cycle for
high temperature sanitization. If you select the Sanitize option,
the “Sanitize” lamp blinks when the water temperature reaches
the sanitary temperature [over 156 ˚F (69 ˚C)], and then remains
illuminated until the Sanitize option ends. When you press the
POWER button, the “Sanitize” lamp turns off.
NOTE
• The Normal cycle with the Sanitize option selected is NSF
certied.
• The Sanitize feature operates in accordance with NSF/ANSI
Standard 184 for residential dihwashers. Certied residential
dishwashers are not intended for licensed food establishments.
05 Hi-Temp Wash
Raises the main wash temperature to improve cleaning for loads
containing tough, baked-on food.
NOTE
Hi-Temp Wash is not available for the Express 60 cycle.
06 Control Lock
(3sec)
Control Lock lets you lock the buttons on the control panel so
children cannot accidentally start the dishwasher. To activate
Control Lock, hold the Control Lock button down for three (3)
seconds. To de-activate Control Lock, hold the Control Lock button
down for three (3) seconds again.
07 Indicator
Rinse rell
• If the “Rinse rell” indicator is lit, it means the dishwasher is
low on dishwasher rinse aid and requires a rell.
Delay start
• If the “Delay start” indicator is lit, it means, you selected the
“Delay Start” option.
English14
Setting up your dishwasher
DW60R2014(A5)_IB_DD81-02706A-00_EN.indd 14 12/24/2018 12:15:58 PM