Over Temperature Sensor Resistance Value Chart
Test Mode List
Error Code(s) can be stored in the PCB.
There is a max of 5 error codes that can be
stored. To recall the error codes, follow the
procedures below:
1. Press CLOCK Key once.
2. Press the CLOCK Key again to select AM.
3. Press number keys 1, 2, 3, 4.
4. Press the SET/START key.
5. Hold CUSTOM COOK and “0” key
simultaneously for 2 seconds. The most
recent error code will be displayed.
6. Keep on pressing “0” key to check the 5
most recent error codes.
7. Press the Clear/Off Key to return to normal
operation.
Oven Error Code Recall program
To Next Page
Loading...
