Samsung FH052EAV1 - Page 22

Samsung Electronics
Operation method Applicable button Indicating state
Step 1
Method)
① Remove the battery of remote
controller.
② Push the Off Timer and Cancel button
simultaneously.
③Insert the battery.
Result)
When the display of remote
controller is indicated as shown
in the right, then go to the step 2.
Step 2
Method)
If the first digit of remote
controller shows "0", go to the step 3.
• If it shows 1, press the Mode button one
time to change it into 0 and then go to step
3.
Step 3
Method)
Input the second digit of option code by
pressing the High Temp button.
example) 0
21E311422852A311439421F
Result)
If 2 is displayed, go to the step 4
(whenever pressing the button, 1~9,
A,B,C,D,E,F are lit in order.)
3-3-2 Type B( Setting Option Setup Method)
3-7