4. Now you should transfer all the files from the old device to the new
one. We recommend that you do it wirelessly. It is important that
both devices are connected to a network. Do not forget to start
Smartswitch on the old device. This can take up to 40 minutes.
Install MFA, Multifactor Authentication
Once the device is installed, it’s time to install Multifactor Authentication (MFA).
Multifactor authentication provides an additional layer of protection in the login
process. When accessing accounts or apps, users undergo an additional identity
verification, such as fingerprint reading or a code that comes to your phone.
If you want to know more about how MFA works, please read here:
https://docs.microsoft.com/sv-SE/azure/active-directory/authentication/concept-
mfa-howitworks
Install MFA:
1. Open Google play on the new device and install Microsoft Authenticator.
2. Go to this link: aka.ms/mfasetup and then log in. This should be done on a
computer then you will need to scan a QR code with your mobile phone in
the next steps.
3. After logging in to aka.ms/mfasetup the following page should be
displayed.
To Next Page
Loading...
