Basics
25
Initial setup
When you turn on your device for the first time or after performing a data reset, follow the on-
screen instructions to set up your device.
The initial setup procedures may vary depending on the device’s software and your
region.
1
Turn on the device.
2
Select your preferred device language and select .
Select a language.
3
Select a Wi-Fi network and connect to it.
If you do not connect to a Wi-Fi network, you may not be able to set up some device
features during the initial setup.
4
Follow the on-screen instructions to proceed the initial setup.
5
Set a screen lock method to protect your device. You can protect your personal
information by preventing others from accessing your device. To set the screen lock
method later, tap
No, thank you
.
To Next Page
Loading...
