Basics
22
Case (only for some models)
You can attach only the case designed for this device to protect it.
•
If there is debris on the case’s attachment surface, wipe the surface clean before
using the case.
•
Wash the case’s attachment surface under running water, and dry it thoroughly.
•
When you detach the case from your device, be careful not to apply pressure to the
camera part of the device. Doing so could damage the device.
Attaching the case
To attach the case to your device, insert your device into the case as shown in the figure
below.
1
2
3
4
To Next Page
Loading...
