Getting started
18
Replacing the S Pen nib
While using the S Pen, the S Pen nib may get dull. If the nib is dull, replace it with a new one.
1
Hold the nib with the tweezer firmly, and then pull it out.
2
Insert a new nib into the S Pen until you hear a click.
Do not let your finger get caught between the tweezer and the nib.
•
Do not reuse old nibs. Doing so may cause the S Pen to malfunction.
•
Do not press the nib excessively when inserting the nib into the S Pen.
•
Do not insert the round end of the nib into the S Pen. This may cause damage to
the S Pen or your device.
The black-coloured nib has a black rubber cap on the tip. If the rubber cap is worn
down, replace the nib with a new one.
To Next Page
Loading...
