14
5. When charging is finished, first unplug the chargerās
power plug from the AC wall outlet, then disconnect
the chargerās connector from the device.
6. If you are using the older style USB 2.0 cable to charge
your battery, plug the flat end of the cable into the
smaller port in the deviceās Charger/Accessory jack.
Important!
If your handset has a touch screen display, please
note that a touch screen responds best to a light
touch from the pad of your finger or a non-metallic
stylus. Using excessive force or a metallic object
when pressing on the touch screen may damage
the tempered glass surface and void the warranty.
For more information, refer to āStandard Limited
Warrantyā on page 339.
To Next Page
Loading...
