Samsung Galaxy Note 3 - Restarting the Device; Locking and Unlocking the Device; Voicemail

Getting Started 17
Important! The device name is also used to provide an
identification for your device’s Bluetooth and
Wi-Fi Direct names.
3. Tap
Finish to complete the setup process.
4. Read the on-screen Collect diagnostics information.
Note: This software collects only diagnostic data from your
device so that T-Mobile technicians can better
troubleshoot issues with your device.
5. Select either
More Info... (to read additional
information) or
Close to close the message screen.
Important! Selecting Close only closes the current description
screen and does not disable data collection.
To disable data collection, see “Collect
Diagnostics” on page 303.
Restarting the Device
1. Press and hold ( Power/End ) until the Device
options screen appears.
2. Tap
Restart ().
Locking and Unlocking the Device
By default, the device screen locks when the backlight turns
off.
 Place your finger on the screen and swipe the glass in
any of the directions shown unlock the device.
Note: You can choose to configure lock settings to prevent
unauthorized use of your device. For more information,
refer to “Security” on page 310.
Voicemail
Setting Up Your Voicemail
Your device automatically transfers all unanswered calls to
voicemail, even if your device is in use or turned off. As soon
as your battery is charged and the micro SIM card inserted,
activate your voicemail account.