EasyManua.ls Logo

Samsung Galaxy Note 3 - Page 238

Samsung Galaxy Note 3
375 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
232
Keep Wi-Fi on During Sleep
By default, when your device enter a sleep mode, your Wi-Fi
connection stays on all the time. If the feature is Never
enabled during sleep that current data usage is taken over by
your SIM and its network connection.
1. From the main
Settings
page, tap
Connections
tab
āž”
Wi-Fi
.
2. Press and then tap
Advanced
āž”
Keep Wi-Fi on
during sleep
.
3. Select an available option:
•Always
: maintains your current active Wi-Fi connection even
during sleep.
• Only when plugged in
: maintains the active Wi-Fi connection
only when the device detects it is connected to a power supply.
This reduced the drain on your device’s battery.
• Never (increase data usage)
: shuts off the current Wi-Fi
connection during sleep and diverts any current data usage to
the cellular network connection.
Allow scanning
Allows the Google location service and other apps to scan for
networks, even when Wi-Fi is turned off.
1. From the main
Settings
page, tap
Connections
tab
āž”
Wi-Fi
.
2. Press and then tap
Advanced
.
3. Tap the
Always allow scanning
field to activate or
deactivate the feature.
Auto Network selection
Allows the device to automatically switch between Wi-Fi
network or cellular network.
1. From the main
Settings
page, tap
Connections
tab
āž”
Wi-Fi
.
2. Press and then tap
Advanced
.
3. Tap the
Auto network switch
to activate the feature that
would allow the device to connect to the best available
signal connection.

Table of Contents

Other manuals for Samsung Galaxy Note 3

Related product manuals