274
⢠Set up call rejection messages
: allows you to manage both
existing rejection messages and create new ones.
⢠Answering/ending calls
: allows you to manage the settings
for answering and ending calls.
ā
The home key answers calls
allows you to press to
answer the phone.
ā
Voice control
allows you to answer incoming voice calls using
voice.
ā
The power key ends calls
allows you to press the power key
to end the current call.
⢠Turn off screen during calls
: allows you to force the screen to
turn off during an active call.
⢠Call alerts
: allows you to assign call alert tones and activate
call alerts and vibration.
ā
Call vibrations
: vibrates the phone when the called party
answers. Choose from: Answer vibration or Call-end vibration.
ā
Call status tones
: assigns sounds settings during the call.
Choose from: Call connect tone, Minute minder, and Call end
tone.
ā
Alerts on call
: selects whether alarm and message notification
is turned off during a call.
⢠Incoming call notifications
: when enabled, shows notification
pop ups for incoming voice calls when the screen is on.
⢠Call accessories
: allows you to assign headset settings during
incoming calls.
ā
Automatic answering
configures the device to automatically
answer and incoming call when a headset is detected.
ā
Automatic answering timer
configures the time delay before
the device automatically accepts the incoming call.
ā
Outgoing call conditions
configures the connected Bluetooth
device to make outbound calls within one of two settings: Even
when device locked or Only when device unlocked.