Changing Your Settings 291
–
Automatic answering timer
configures the time delay before
the device automatically accepts the incoming call.
–
Outgoing call conditions
configures the connected Bluetooth
device to make outbound calls within one of two settings: Even
when device locked or Only when device unlocked.
• My call sound
: allows you to personalize the sounds you hear
during a call with and without earphones.
–
Tap
My call
sound settings
and select
Personalize call
sound
.
–
Follow the detailed on-screen instructions.
• Use extra vol. for calls
: activating this feature places an extra
volume button on your currently active call screen.
• Increase volume in pocket
: increases the ringtone volume
when the device is in a pocket or a bag. Uses the proximity
sensor to detect its location.
• Call forwarding
: configures call forwarding options.
Note:
If the Wi-Fi Calling feature is active and connected, the
Call forwarding feature is greyed-out and inaccessible.
• Wi-Fi Calling
: Allows you to both activate/deactivate the Wi-Fi
Calling feature and configure its settings.
• Additional settings
: allows you to configure additional call
settings. For more information, refer to
“Configuring
Additional Voice Call Settings”
on page 295.
• Voicemail service
: allows you to assign the service.
• Voicemail settings
: displays the settings for the voicemail.
•Ringtone
: assigns your device’s ringtone.
•Vibrate
: configures the vibrate settings. Choose from Always,
Only in silent mode, or Never.
• TTY mode
: allows you to configure the TTY settings. For more
information, refer to
“TTY Mode”
on page 295.
Call rejection
1. From the main
Call settings
page, tap
Call rejections
.
2. Activate the feature by moving the
Auto reject mode
slider to the right.
3. Tap
Auto reject mode
and tap one of the following
options:
• All numbers
: to reject all calls.
• Auto reject numbers
: to reject all calls in your Reject list.
To Next Page
Loading...
