300
Setup the Voice Call Ringtone
This option allows you to set the ringtone.
1. From the main
Settings
page, tap
Sound
.
2. Tap
Device ringtone
.
3. Tap a ringtone from the available list. The ringtone
briefly plays when selected.
4. Tap
OK
to assign a ringer.
Setup the Device Vibration
This option allows you to set your device to vibrate and ring.
1. From the main
Settings
page, tap
Sound
.
2. Tap
Device vibration
.
3. Select a vibration pattern and tap
OK
.
Setting a Default Notification Ringtone
This option allows you to set the ringtone that will sound for
notifications and alarms.
1. From the main
Settings
page, tap
Sound
➔
Default
notifications
.
2. Tap one of the ringtones and tap
OK
.
Setting up Vibration When Ringing
This option allows you to enable your phone to vibrate when
a call is incoming.
1. From the main
Settings
page, tap
Sound
.
2. Tap the
Vibrate when ringing
field to activate the
feature.
Audible System Tone Settings
These options are used when you use the dialing pad, make
a screen selection, lock your screen, or tap the screen. Each
time you press a key or make a selection the selected tone
sounds.
1. From the main
Settings
page, tap
Sound
.
2. Tap
Keytones
to activate a tone when you use
on-screen keys. A check mark displayed next to these
features indicates active status.
3. Tap
Touch sounds
to activate a tone when you touch the
screen. A check mark displayed next to this feature
indicates active status.
4. Tap
Screen lock sound
to activate a tone when you use
the Lock screen. A check mark displayed next to this
feature indicates active status.
To Next Page
Loading...
