NFC Settings
Use NFC (Near Field Communication) to share information between your device and another
NFC device by touching the devices together, typically back-to-back.
NFC is used with S Beam and Android Beam, and must be turned On to use these features.
Note: Tap
> Help for information about using NFC and Android Beam.
Turn NFC On or Off
Use NFC (Near Field Communication) to share information between your device and another
NFC-capable device or NFC tag, by touching the devices together, typically back-to-back.
1. Press and tap > Settings > Connections.
2. Tap the ON/OFF switch beside NFC to turn NFC On or Off.
Android Beam
With Android beam, you can transmit app content via NFC to other NFC devices that support
Android Beam.
Android Beam uses NFC, so NFC must be turned On before you can turn on Android Beam.
1. Press and tap > Settings > Connections.
2. Tap the ON/OFF switch beside NFC to turn NFC On. NFC must be on to use Android
Beam.
3. Tap NFC to access Android Beam settings, and then tap the ON/OFF switch beside
Android Beam to turn Android Beam On or Off.
Tap and Pay
With your phone and a payment app, you can use your device to pay for items by tapping it to
an item at the point-of-purchase. Google Wallet is an example of a payment app. You must
have the payment app set up on your phone to use with Tap and Pay.
1. Press and tap > Settings > Connections.
2. Touch NFC, and then touch the ON/OFF switch beside NFC to turn NFC On. NFC must
be on to use Tap and Pay.
3. Touch Tap and Pay to access Tap and Pay settings.
Settings 142
To Next Page
Loading...
