Samsung Galaxy S20 - Page 119

• Wi-Fi power saving mode: Enable Wi-Fi traffic analysis to reduce battery
usage.
• Network notification: Receive notifications when open networks in range are
detected.
• Manage networks: View saved Wi-Fi networks and configure whether to auto
reconnect to or forget individual networks.
• Wi-Fi control history: View apps that have recently turned your Wi-Fi on or
off.
• Hotspot 2.0: Connect automatically to Wi-Fi networks that support
Hotspot2.0.
• Install network certificates: Install authentication certificates.
• MAC address: View your device’s MAC address, which is required when
connecting to some secured networks (not configurable).
• IP address: View your device’s IP address (notconfigurable).
Wi-FiDirect
Wi-FiDirect uses Wi-Fi to share data between devices.
1.
From Settings, tap Connections > Wi-Fi, and then tap to turn on Wi-Fi.
2.
Tap More options > Wi-FiDirect.
3. Tap a device, and then follow the prompts to connect.
TIPWhen sharing a file, tap Wi-Fi Direct to use this feature.
Disconnect from Wi-Fi Direct
Disconnect your device from a Wi-FiDirect device.
◌
From Settings, tap Connections > Wi-Fi > More options > Wi-FiDirect. Tap a
device to disconnect it.
119
Settings