44
• Turn o the vibration function when
charging wirelessly. If the product vibrates,
it may not fully charge or fall o the
wireless charger.
• Remove any commercially-available cases,
covers, plastic lm, stickers, and so on
attached to the product before charging.
• Check that the wireless charger (sold
separately) and the product are not wet.
• Do not wirelessly charge the product while
it is connected to the specied charging
equipment (sold separately).
• Keep the product away from devices that
support wireless charging. Otherwise,
the au product you wish to charge may
not be detected correctly and may not be
charged.
• If the product receives interference from
a TV or radio, use the product as far away
from the TV or radio as possible.
• Depending on the Qi specication-
compatible product, it may not receive
calls while charging. Charge the product
with an au-approved product.
• Depending on the Qi specication-
compatible product, charging may not be
able to start due to mutual interference
with the Osaifu-Keitai
®
function. Charge
the product with an au-approved product.
• If you run an application on the product
while it is being charged wirelessly, it may
not fully charge.
• Although the product may become warm
while it is on the wireless charger (sold
separately), this is not a fault.
• Reception quality may decrease while
the product is charging on the wireless
charger (sold separately).
• Do not move the wireless charger (sold
separately) and the product while it is
charging.
• After the product has nished charging,
the remaining battery level may decrease,
even if the product is left as is.
To Next Page
Loading...
