36
Notes on Usage
• Do not cover the proximity/light sensor with your
nger or put a sticker on it. Doing so may hinder
it from detecting the ambient brightness and
functioning correctly.
■
Touch Panel
• The touch panel is designed to be touched lightly with
ngers. Do not press hard on the touch panel with your
ngers or press pointed objects (such as ngernails,
ballpoint pens and pins) against the touch panel.
• The touch panel may not operate properly if
stickers or sheets (such as commercially available
protective lms or peep-proof sheets) are attached
to the display. In addition, since the ngerprint
recognition sensor of this product is built into
the display, it may not be possible to register or
authenticate ngerprints.
• When using a protective lm, make sure that the
protective lm is compatible with the ngerprint
recognition sensor.
• Fingerprint authentication may fail if a commercially
available protective lm is attached to the display.
• When carrying the product in your pocket or bag,
take care not to put the touch panel close to metals
or other conductive materials, as it might cause
false operation of the touch panel.
To Next Page
Loading...
