+
•
•
•
C>
C>
Settings
Connect to a hidden Wi-Fi network
If the Wi-Fi network you want is not listed after a scan, you can still connect to it by
entering the information manually. Ask the Wi-Fi network administrator for the name
and password before you begin.
1.
From Settings, tap
Connections > Wi-Fi, and then tap to turn on Wi-Fi.
2.
Tap
Add network at the bottom of the list.
3. Enter information about the Wi-Fi network:
•
Network name: Type the exact name of the network.
•
Security: Select a security option from the list, and enter the password if
required.
•
Password: Enter the network password.
•
Hidden network: Add a hidden network.
•
View more: Define other advanced options, such as IP and Proxy settings.
4. Tap Save.
TIP Tap Scan QR code to connect to a Wi-Fi network by using your device’s
camera to scan a QR code.
Advanced Wi-Fi settings
You can configure connections to various types of Wi-Fi networks and hotspots,
manage saved networks and look up your device's network addresses. Options may
vary by carrier.
1.
From Settings, tap
Connections > Wi-Fi, and then tap to turn on Wi-Fi.
2.
Tap
More options > Intelligent Wi-Fi for the following options:
•
Switch to mobile data: When enabled, your device will switch to mobile data
whenever the Wi-Fi connection is unstable. When the Wi-Fi signal is strong, it
switches back to Wi-Fi.
•
Switch to better Wi-Fi networks: Automatically switch to faster or more
stable Wi-Fi networks.
•
Turn Wi-Fi on/off automatically: Turn on Wi-Fi in frequently-used locations.
•
Show network quality info: Display network information (such as speed and
stability) in the list of available Wi-Fi networks.
118
To Next Page
Loading...
