Web & network
76
Sending data via Android Beam
Use the Android Beam feature to send data, such as webpages and contacts, to NFC-enabled
devices.
On the Applications screen, tap
Settings
→
Connections
→
NFC
. Drag the
Android Beam
switch to the right.
Select an item, find the location of the NFC antenna on the other device, touch the other
device’s antenna with your device’s antenna, and then tap your device’s screen.
S Beam
Use this feature to send data, such as videos, images, and documents.
Do not send copyright-protected data via S Beam. Doing so may violate copyright
laws. Samsung is not responsible for any liabilities caused by the illegal use of
copyrighted data.
On the Applications screen, tap
Settings
→
Connections
→
S Beam
. Drag the
S Beam
switch
to the right.
Select an item, find the location of the NFC antenna on the other device, touch the other
device’s antenna with your device’s antenna, and then tap your device’s screen.
If both devices try to send data simultaneously, the file transfer may fail.
To Next Page
Loading...
