Multimedia 184
Note:
If the
Touch to beam
screen does not appear on the source
device:
- Pull them apart
- Verify the image is visible in the preview window on
the source device (providing the file)
- Place them together again
8. From the
Touch to beam
screen, tap the reduced image
preview to begin the transfer. After a few seconds (depending
on file size) the recipient with then see the transferred file
displayed on their screen.
To share multiple pictures via S Beam:
1. On the source device (containing the desired image or video),
tap (
Apps
)
➔ (
Gallery
).
2. Locate the selected folder.
3. Touch and hold the first image and place a check mark on it
and all desired images.
4. Place the two active NFC-enabled devices back to back to
begin.
5. From the
Touch to beam
screen, tap the reduced image
preview to begin the transfer.
6. When prompted, separate the two devices.
To Next Page
Loading...
