Call Functions and Contacts List 66
3. Use the keypad to enter the additional numbers that will be
dialed automatically after the second pause.
Tip:
You can create pauses longer than three seconds by entering
multiple 3 second pauses.
4. Tap .
Wait Dialing
Inserting a Wait into your dialing sequence means that the phone
waits until it hears a dial tone before proceeding with the next
sequence of numbers.
•
Wait
sends the next set of numbers only after tapping
Yes
. This is
indicated in the number string as a semicolon (
;
).
Note:
Do not add multiple Waits (;) to a number string as this will
continue to prompt you after each sequence.
1. From the Home screen, tap
and use the on-screen
keypad to enter the phone number.
2. Press
and then tap
Add wait
. This feature causes the
phone to require your acceptance before sending the next set
of entered digits.
3. Tap .
4. Once prompted to
Send the following tones?
, tap
Yes
to dial the
remaining digits.
To Next Page
Loading...
