269
• My xxx TV
: selected when a signal is fed directly into the TV and no box
is used. Channels are changed directly on the TV by using the TV remote
and not a box’s remote.
Note:
Try matching your current channel selection method.
6. Select the Satellite Box Brand from the available list. For
example, DirectTV
®
.
•
If your brand does not appear in the list, tap
Show other brands
and
follow the on-screen instructions.
Important!
You must configure your set top box for IR communication
with your device. If you do not select
More info
below and
follow the on-screen instructions you may not be able to
properly use the application.
7. When prompted to Enable IR, tap
More info
to learn how to
configure your set top box to receive and respond to IR
controls.
8. Confirm you have completed the IR setup process and
programming your box.
9. If prompted, place a check mark in the
Notification Panel
field
and tap
Done
. This allows you to pin a shortcut to your remote
on the Notification Panel.
10. Press (
Back
).
To Next Page
Loading...
