Changing Your Settings 296
To activate your connection:
1. From the main
Settings
page, tap
Connections
tab.
2. In a single motion touch and slide the
Wi-Fi
slider to the right to
turn it on. The slider color indicates the activation status.
3. Tap
Wi-Fi Direct
.
4. Tap
Scan
and select the single device name to begin the
connection process to another Wi-Fi Direct compatible device.
– or –
Tap
Multi connect
➔
Scan
and select all the device names to
begin the connection process to these Wi-Fi Direct compatible
devices.
Note:
The target device must also have Wi-Fi Direct service active and
running before it can be detected by your device.
5. Tap
Done
. The direct connection is then established. Confirm
appears in the Status bar.
6. When prompted to complete the connection, the recipient
should tap
OK
. Your status field now reads “Connected” and
your connected device is listed within the Wi-Fi Direct devices
listing.
To Next Page
Loading...
