280
3. Place a green check mark adjacent to those features
you would like to enable. Choose from: Block incoming
calls, Turn off notifications, Turn off alarm and timer,
Turn off LED indicator.
4. Configure a timeframe for these features to be active.
Remove the check mark from the
Always
field to
configure the
From
and
To
time fields.
5. Tap
Allowed contacts
to assign those contacts that are
exempted from these rules. Choose from None, All
contacts, Favorites, or Custom. Allowed contacts will
then appear in the
Allowed contact list
.
Hands-free Mode
When enabled, alarm and information will be read aloud.
1. From the Home screen, press and then tap
Settings
➔ (
My device
tab) ➔
Hands-free
mode
.
2. In a single motion touch and slide the
Hands-Free mode
slider to the right to turn it on.
Confirm the Hands-Free mode active icon
appears in the Status bar.
3. Enable any of the following options:
• Incoming call
: read out callers’ information when receiving
incoming calls.
•ChatON
: read out ChatON callers’ information when receiving
incoming calls.
• Air call-accept
: wave your hand over the screen to accept
incoming calls.
• Message
: read out senders’ information when receiving
incoming calls.
•Alarm
: read out alarm information when alarms sound.
• Schedule
: read out scheduled alarm information when alarms
sound.
Power Saving Mode
This feature allows you both automatically set the phone to
use a power saving mode and configure additional power
saving options manually, all in an effort to conserve battery
power.
1. From the Home screen, press and then tap
Settings
➔ (
My device
tab) ➔
Power saving
mode
.
To Next Page
Loading...
Need help?
General
