Applications 171
7. Place the two active NFC-enabled devices back to back
to begin (1).
Note:
If the
Touch to beam
screen does not appear on the
source device:
- Pull them apart
- Verify the image is visible in the preview window on
the source device (providing the file)
- Place them together again
8. From the
Touch to beam
screen, tap the reduced image
preview to begin the transfer (2).
9. When prompted, separate the two devices. After a few
seconds (depending on file size) the recipient with then
see the transferred file displayed on their screen.
To share multiple pictures via S Beam:
1. On the source device (containing the desired image or
video), tap ➔
Gallery
.
2. Locate the selected folder.
3. Touch and hold the first image and place a checkmark
on it and all desired images.
4. Place the two active NFC-enabled devices back to back
to begin.
To Next Page
Loading...
