Easy2Fix – Replacement Guide
Step 20
Need to re-heat the LCD by using a
blow dryer/hair dryer, this is to
unstruck the adhesive at the
bottom of the LCD with the
digitizer, then carefully slip the
plastic pick in between the LCD and
the digitizer, and move around the
edges until the LCD come off
Step 21
Need to peel off the digitizer gently
from the frame, also need to
remove the home key on the frame
*Be extra careful to take out the
home key, because the flex cable is
very fragile
Step 22
To reassemble your device, follow
the above instructions in reverse
order
To Next Page
Loading...
