Connecting with other devices
97
Viewing content on a TV
Before you connect your device to a TV, connect the Smart View-enabled device to the TV. To
set up the connection, refer to the device’s user manual. The following actions are an example
of viewing content on a TV connected via an AllShare Cast dongle.
1
Connect the AllShare Cast dongle to the TV using an HDMI cable.
2
On the TV, select a connection mode, such as HDMI mode, to connect an external device.
3
Open the notifications panel and tap
→
Smart View
.
The detected devices are listed.
4
Select a device to connect to.
Your device’s screen appears on the TV screen.
If you connect the device for the first time, tap and hold the dongle’s name in the list and
enter the PIN shown on the TV screen.
5
Open or play a file, and then control the display with the keys on your device.
To Next Page
Loading...
