Also, ensure that the rubber seal is free from debris, such
as sand or dust to prevent damage to the device.
•
Do not expose the device to salt water, ionised water,
or soapy water.
•
The back cover may be loosened if the device is
dropped or receives an impact. Ensure that the back
cover is properly aligned and tightly closed.
•
If the device has been immersed in water or the
microphone or the speaker is wet, sound may not be
heard clearly during a call. Ensure that the microphone or
the speaker is clean and dry by wiping it with a dry cloth.
•
If the device gets wet, dry it thoroughly with a clean,
soft cloth.
•
The water-resistant design of the device causes it to
vibrate slightly in certain conditions. V
ibrations in these
conditions, such as when the volume level is high are
normal and do not aect the device’s performance.
•
The touch screen and other features may not work
properly if the device is used in water or in other
liquids.
Your device has been tested in a controlled
environment and certied to be water- and
dust-resistant in specic situations (meets
requirements of classication IP67 as described
by the international standard IEC 60529 - Degrees
of Protection provided by Enclosures [IP Code];
test conditions: 15 - 35 °C, 86 - 106 kPa, 1 meter, 30
minutes). Despite this classication, your device is
not impervious to water damage in any situation.
To Next Page
Loading...
